- ...the difference is we care
- About Us
- Our Technologies
- Our Partners
- News & Events
A New Generation of Advanced Circuit Board Plotters
The all-rounder in the new LPKF ProtoMat S series is great for virtually any job in in-house prototyping. The ProtoMat S63 masters 2.5-dimensional material machining and features a faster spindle speed of 60.000 rpm. This also makes it suitable for drilling test adapters and housing production.
Automatic tool change
Up to 15 tools are automatically changed during production. This reduces set-up times and allows for unattended production.
Automatic milling width adjustment
The conical milling cutters produce different insulation channels depending on the penetration depth. The automatic milling width adjustment maintains uniform PCB track widths.
The built-in dispenser applies solder paste onto the substrates fully automatically with minimum data preparation.
60.000 rpm spindle motor
The 60.000 rpm milling spindle ensures the shortest machining times and highest accuracy.
Upgradeable to ProtoMat S103
Upgrade kit includes 100.000 rpm spindle and pneumatic non-contact working depth limiter and vacuum table.
Options & accessories
a. Dust extraction
b. Compressor incl. 50 l tank
c. Vacuum table
d. Status light
Partner: LPKF Laser & Electronics AG
|Max. material size and layout area (X/Y/Z)||229 mm x 305 mm x 35/22 mm (9” x 12” x 1.4/ 0.9”)*|
|Resolution (X/Y)||0.5 μm (0.02 mil)|
|Repeatability||± 0.001 mm (± 0.04 mil)|
|Precision of front-to-back alignment||± 0.02 mm (± 0.8 mil)|
|Milling spindle||Max. 60,000 rpm, software controlled|
|Tool change||Automatic, 15 positions|
|Milling width adjustment||Automatic|
|Tool holder||3.175 mm (1/8”), automatic holder|
|Drilling speed||120 strokes/min|
|Travel speed (X/Y)||Max. 150 mm/ s (6”/s)|
|X/Y-drive||3-phase stepper motor|
|Z-drive||2-phase stepper motor|
|Dimensions (W x H x D)||670 mm x 540 mm x 840 mm (26.4” x 21.3” x 33”)|
|Weight||58 kg (128 lbs)|
|Power supply||90 – 240 V, 50 – 60 Hz, 450 W|
|Compressed air supply (only for Dispensing)||6 bar (87 psi), 10 l/min (0.35 cfm)|
|Required accessories||Dust extraction|
* Value for Z without/with vaccuum table